Cortical screw India – Assured stable fixation of injured bones for fast recovery

Cortical screws hold an entire bone repairing system tightly together at one place to ascertain timely healing of a bone injury. The surgeons can perform their job to their satisfaction with the help of these screws. Cortical screw India manufacturers carry high reputation for maintaining high qualitystandards at every phase from start to finish in making these devices. They make an entire range of cortical screws that the surgeons specifically need to perform an orthopedic surgery.
Cortical screws have fine threads so that it firmly anchors in cortical bone. The main purpose of using cortical screw is to provide fixation by itself. The screws may also be used in conjunction with the other devices.  A feature of these screws is that these have closely-spaced shallow threads. As compared to cancellous screws, cortical screws have large core-to-outer diameter ratio.                            

 Two types of cortical screws

Cortical screws generally are blunt headed and much stronger as compared o cancellous screws. The surgeons like to use full-threaded screws to fixe plates on larger bones. Thus, the surgeons can ensure stability to the bone structure while fixating both cortices. However, the blunt end of the screws should not reach beyond a few millimeters in the soft tissues to avoid any serious damages to it.
In most of the cases, cortical screws are used in two manners. The surgeons can choose to use self tapping screws and non-self tapping screws. A self-tapping screw is called so as it can tap its own way to hole. A non-self tapping screw does not have the self-tapping ability. A surgeon will choose self-tapping screws to drill a hole into a hard substance such as metals and hard plastics. To cut the thread, the screw there is a flute in the screw tip.

One of the reasons the surgeons use self-tapping cortical screws is that they can work through a substance quickly and easily. The surgeons do not have to use any instrumentation technique to drill a hole. Another feature of these screws is that the surgeon can remove or re-insert them anytime when required. The surgeon specially take care that the screws does not go inside of the bone too much. The screw should be just outside of the bone cortex. 

To use non-self tapping screws, the surgeons first drill a hole as these screws are lacking in self-tapping ability. For these screws, a separate tap is required to cut the thread. These screws have blunter and rounder tip with no flutes.

Quality parameters ensured


Cortical screw India manufacturers make these screws by strictly following the global quality standards. They design and make the screws as per the highest standards set by the global bodies. Orthopedic implants India makers adhere to the standards because of the sophisticated technologies they have. The manufacturers are therefore capable of satisfying the demand of the orthopedic hardware not only of domestic but global markets also.


The Indian manufacturers are known for their high quality standards of designing, selection of right material, and technology for making cortical screws and other orthopedic implants. Only the highest grade of materials is used for making of these screws and other Orthopedic Implants in  India. Each such screw implant goes through a set number of phases with strict quality checks made by qualified professionals. 

Comments

Popular posts from this blog

Hip prosthesis India – Get Perfect Hip Replacement Solution

HEMC Ortho – Manufacture and Exporter of High Quality General Instruments

Hip prosthesis India – Perfect Solution To Hip Replacement Issues